Tag Archives: Minnesota Bike Guide

Enjoying the nearly endless possibilities of Hyland Park

by John Brown, HaveFunBiking.com

In the western part of Bloomington Minnesota over 1,000 acres of parkland act as the Twin Cities best destination for active families, recreational riders, and beach goers. The Hyland Park Reserve encompasses over 8 miles of paved bike path, A family friendly beach, breathtaking prairies, a Ski resort, seven miles of cross country ski trails, a spectacular playground, and countless other attractions. Read on to learn about what possibilities you could explore.

Biking Hyland Park

While not a loop, the trail system in Hyland Park is well laid out to get you to every corner of the park. However, there are small loops within the trail system. The trails in the southernmost part of the park loops around through dense forest and winds along the Hyland Lake. As you move further north, the trails navigate through the most developed portion of the park, passing the Shoots and Ladders Playground and the visitor center. While traveling north, Hyland park reveals it’s true beauty while sending you through vast prairies. In the northernmost part of the park, the trails pass under the shadow of the Hyland Ski and Snowboard area. Even though the trails pass through very different topography, they all are well maintained, relatively flat, and wide enough to offer comfortable riding for all ability levels.

Attractions

Hyland Ski and Snowboard Area

The Hyland Ski area is a downhill ski area with two terrain parks, Ski jumps and a park featuring an 18-hole disc golf course. Through the winter, it is a popular place for lessons and cold weather sports for metro area residents. In the summer, the park periodically operates it’s lifts for mountaintop concerts, bonfires and general outdoor merriment.

Shoots and Ladders Playground

Tucked into the middle of Hyland Park is the most amazing playground you could imagine. It’s tallest 3 story tall tower soars over scores of other structures amassed to put your kids in a state of playground frenzy. Most surfaces are covered in soft rubber, woodchips, or sand offering safe areas for kids of all ages. The park is open to all two-legged creatures, but please leave your four legged friends at home. Additionally, when the mercury rises Shoots and Ladders has a water misting play area for the kids and enormous umbrellas over the picnic areas for he parents.

Richardson Nature Center

Hidden in the dense foliage of Hyland Park is the Richarson Nature Center, a stunning natural gateway for visitors young and old. After parking in their ample lot, stroll a few feet down the path up to the nature center. The center is a two story home to Raptors (upstairs) and amphibians (downstairs). They have classrooms and events in the center throughout the year for anyone looking to learn more about the ecosystem. One of the best parts of the Richardson Nature Center is the kids park they have cleared just down the path. In an open area of forest, kids can build forts and structures with deadfall collected from around the park.

Bush Lake Beach

While not technically in Hyland Park, Bush Lake Beach sits adjacent to Hyland. It is a man-made sand beach on the east shore of Bush Lake. The entrance to the beach just off East Bush Lake Road and just south of the Richardson Nature Center. Through the summer season, you can purchase a one day or season pass for parking. The Aquatic Center at Bush Lake Beach has a snack area and great bathroom amenities.

Year-Round Fun

What is best about Hyland Park is the number of events it has. Throughout the year Hyland Park schedules outdoor and indoor fun for every kind of nature lover. I’ve enjoyed the “Movie Nights on the Hill” a few times and the 4h of July celebration is spectacular. I strongly recommend making the Hyland Park your first stop, when planning an outdoor excursion.

Find more information about this park and the many other fun activities Bloomington has to offer, here.

Bike Pic Aug 30, fun day to ride the Mississippi River Trail

Another fun day to ride the Minnesota section of the Mississippi River Trail on this picture perfect Wednesday. Here in this photo a couple biker chicks round the scenic waterscape, with the Minneapolis downtown skyline in the background.

Get into the zone and plan your next bike outing with family and friends at one of Minnesota’s HaveFunBiking Destinations. View all the fun ideas and bike destinations in the latest Minnesota Bike/Hike Guide.

Thanks for Viewing Our ‘Mississippi River Trail’ Pic of the Day!

We are now rolling into our 10th year as a bike tourism media. As we pedal forward our goal is to continue to encourage more people to bike and have fun while we highlight all the unforgettable places for you to ride. As we continue to showcase more places to have fun, we hope the photos we shoot are worth a grin. Enjoy the information and stories we have posted as you scroll through.

Do you have a fun bicycle related photo of yourself or someone you may know that we should post? If so, please send your picture(s) to: [email protected]. Include a brief caption (for each) of who is in the photo (if you know) and where the picture was taken. Photo(s) should be a minimum of 1,000 pixels wide or larger to be considered. If we use your photo, you will receive photo credit and acknowledgment on Facebook and Instagram.

As we continue to encourage more people to bike, please view our Destination section at HaveFunBiking.com for your #NextBikeAdventure – Also, check out the MN Bike Guide, now mobile friendly, as we enter into our 8th year of producing this hand information booklet full of maps.

Remember, bookmark HaveFunBiking.com on your cell phone and find your next adventure at your fingertips! Please share our pics with your friends and don’t forget to smile. We may be around the corner with one of our cameras ready to document your next cameo apperance while you are riding and having fun. You could be in one of our next Pic’s of the Day.

Have a great day!

Bike Pic Aug 29, many trails are drying, check before mountain biking

Tuesday morning and this mountain biking chick finds a dry trail to enjoy. In Minnesota, check MORC trail conditions to see which trail systems may be open after all the rain, the last couple days.

What better way to continue your summer fun and your #NextBikeAdventure. View all the fun ideas and bike destinations in the latest Minnesota Bike/Hike Guide. Then plan your next outing with family and friends in one of Minnesota’s HaveFunBiking Destinations.

Thanks for Viewing Our ‘Mountain Biking’ Pic of the Day

Have a great day!

Bike Pic Aug 28, Bunny Hop Monday into your sweet spot

If life were a mountain bike trail and a wheelie or Bunny Hop Monday helped smooth out your day-to-day ride or aided you to drop into your sweet spot. Why not review the following tips to make your week an adrenaline high?

Thanks for Viewing Our ‘Bunny Hop Monday’ Pic of the Day!

Smooth Out Your Day-to-Day Ride with Bunny Hop Monday, and:

Have a great day!

Theodore Wirth Park, a gift five minutes from downtown Minneapolis

by John Brown, HaveFunBiking.com

In the western part of the Twin Cities, nestled between Golden Valley and Minneapolis is Theodore Wirth Park. A space almost as large as New York City’s Central park. With in Wirth (as it’s known to the locals) you will find several scenic, natural areas around Birch pond and Wirth Lake, plus two golf courses and a fabulous mountain bike trail system.

For Twin Cities cyclists, it’s a natural playground you should be exited too explore.

Theodore Wirth Park History

What would become Theodore Wirth Park started in 1889 when 66 acres were purchased and established as a park. Now Theodore Wirth park (named after the park system’s superintendent from 1906 to 1936) has over 750 acres. The Central to the park is the Wirth Chalet, a stone and timber structure that offers events, and product rentals for snow sports.

Where to go in Theodore Wirth Park

If you are interested in riding the mountain bike trails of Wirth park, I find it easiest to park at the beach house off Glenwood avenue. From there it’s a quick spin west over to the trailhead. If your interest are in the golf courses or Grand Rounds and Luce Line trails, the Golf Clubhouse on Theodore Wirth Parkway is your best starting point.

What are the trails like in Theodore Wirth Park

The trails at Wirth are predominantly designed for the intermediate rider. As you enter the trails at southern entrance you are greeted with a twisting climb up thorough rolling prairie and into well established woods. The trails themselves are well manicured and smooth with ample bermed turns. Expect to see narrow ribbons of brown winding through ample green surroundings. When you find your way into the northern trails, more rocks get introduced. The majority of the rocks are well embedded into the trails and act as exciting obstacles to manage. The northern trails also exist in denser forests, with far fewer field areas. Overall, the Trails at Wirth are fun and flowie, offer challenges for the most advanced riders while being accessible to casual riders.

Grand Rounds Trail

The Grand Rounds Scenic Byway is one of the countries longest continuous urban parkways. It is a connecting trail to more than 300 miles of regional trail around Twin Cities Metro Area. It also acts as the connecting trail between most of the parks in the Twin Cities area. That said, you can enjoy a day trip on the Grand Rounds Trail all over the Twin Cities via protected and paved bike lanes. The Grand Rounds travels through 7 districts: Chain of Lakes (13.3 miles), Minnehaha (12.6 miles), The Mississippi River (9.2 miles), Downtown Riverfront (1.2 miles), Northeast (6 miles), Victory Memorial (3.8 miles) and Theodore Wirth Park (4 miles). Additionally, this trail is cleared by 6am every day through the winter if you choose to use it for commuting.

Luce Line Trail

The Grand Rounds Bike trail here connects to the binning of the Luce Line trail.

The Luce Line trail is a 63 mile limestone path stretching from Cosmos in western Minnesota to Wirth park. It is available for Biking, hiking, running, jogging, and snow activities in specified areas. This trail is an exceptional way to explore neighborhoods and destinations west of the city.

How to help

If you ride and enjoy the trails at Wirth, consider volunteering for trail maintenance. The Minnesota Off Road Cycling organization (MORC) schedule trail work sessions on Wednesdays through the summer. Consequently, the group meets at 6 O’clock and welcomes anyone interested in helping. Wear long pants, boots, and work gloves because you will be doing hard labor. Moreover, you will find that the hard labor is enjoyable because you are giving back to fellow riders.

Winter riding in Wirth

The mountain bike trails in Wirth Park are extra fun in the winter on a fatty.

While the trails are open through the winter, Fatbiking is not the only sport you can enjoy at Wirth. Therefore, snowshoeing, cross country skiing, tubing, sledding, skating, and, ice fishing are all available within the park. When planning a ride in the fall and spring, be sure to check the MORC website for trail conditions.

Staying Safe by Assessing and Avoiding Road Hazards

by John Brown, HaveFunBiking.com

Nothing spoils a great ride like a bad accident, but most accidents are avoidable. The easiest way to eliminate accidents is to assess road hazards in advance and avoid them. Read on to learn about the most common road hazards and how to manage them.

Road hazards broken and uneven pavement

The easiest road hazard to spot is broken or uneven pavement. Oftentimes starting at the roads edge (where many of us ride), pavement begins to break and crumble from annual hot/cold cycles. The first and best option is just avoid loose sections entirely, but anyone can tell you that’s not always possible. When you are riding through bad pavement, try to raise your body off your saddle by an inch or so and allow your legs and arms to absorb impact. Concentrate on being loose, allowing the bike to move around underneath you, and keeping your momentum directed to where you want to go. Focusing on where you want to go is the most important part, focusing on objects you don’t want to hit increases the chance of hitting them.

Narrow roadways

Sometimes the road narrows, and doesn’t allow for you and drivers to occupy the road together safely. In these situations, it is important to take control of your safety. Do not try to be off to the side as far as possible, this will only encourage drivers to attempt to make an unwise pass. Instead, give yourself space on the road, and try to be as visible and deliberate as possible. Narrow roadways are the ideal place to use hand signals. Additionally, be aware of what is behind you by looking back more frequently than usual. Looking to see who is behind you will give you the information you need, and let drivers know that you see them. Oftentimes drivers will be more patient if they know you are aware of the situation.

Blind turns, driveways, and alleys

You can’t easily avoid what you can’t see, especially if you are going fast. When approaching any blind road or path section, slow down and assume there is someone coming around the corner. Approach the corner with caution, and only accelerate once the coast is clear.

Loose debris on hard surfaces

Sand, Gravel and dirt on pavement can be a recipe for disaster. Any loose debris on the road robs you of the traction you need to ride confidently. Shy of vacuuming every road or trail before your ride, there is no way to avoid the inevitability of debris. What you can do however, is use good judgement when you do encounter it. First, don’t slam on the brakes. Braking shifts your weight forward onto the front wheel making you more unstable in loose conditions. Instead, apply your brakes gently and evenly while trying to remain loose on the bike in case your tires break free. Second, try to keep the bike as vertical as possible and turn only if necessary.

Ice and water

Water and its colder cousin ice are a serious road hazard. You will find that roads and paths that are wet offer far less grip than when dry. Therefore, keep your overall speed down on wet days and brake before turning. If ice is in the forecast, the best measure is to avoid it. Start by ditching the polarized sunglasses that will make the ice difficult to see. Polarized glasses eliminate most glare, and glare is a prime means to identify ice. If you do find yourself on ice, be careful! It takes almost no side motion to put you on the ground when riding on ice. I find it best to do almost nothing until you make your way off the ice, that means no braking, no turning, no movement, Just coast.

Paint and slippery surfaces (metal, marble, tile) train tracks

The last set of road hazards worth mentioning are slick surfaces. These surfaces include metal (train tracks, manholes, and sewer grates), painted pavement, and smooth aggregate (like marble or tile often found in industrial zones). For metal, try to avoid it when wet (it’s as slick as ice) and cross train tracks as perpendicularly as possible. Painted surfaces and smooth aggregate need to be avoided when wet as well. While they have more traction when dry, it’s still worth being careful.

After reading this, you may feel like everything on the road is out to get you. Nothing could be further from the truth. In fact, you have probably encountered all these hazards on your last ride and survived. Overall, road hazards rarely cause an accident but are something to be cognizant of.

How to adjust your front derailleur for perfect and silent shifting

by John Brown, HaveFunBiking.com

In the late 1920’s, in France, there was a bike race under way and it wasn’t the Tour De France. Instead, this race was a technological race that brought the derailleur into the light. Before 1928, bicycles had a maximum of two speeds, and you needed to remove the rear wheel to change those gears. As there was need for quicker shifting, the bicycle derailleur was born. Initial derailleurs consisted of nothing more than paddles that were actuated by steel rods located between the rider’s legs. Needless to say, there was a lot of finesse that went into shifting those bikes. Then after the second world war parallelogram derailleurs, what we use today, were developed so riders could shift their gears with ease. Read on to see how to get the most out of 100 years of technological advancements. You will find adjusting your front derailleur is easy if you follow these steps.

Early “Rod Style” Benelux front derailleur – Yikes

Front Derailleur parts

Limit screws (A) – The front derailleur needs to work within the largest and smallest ring. Limit screws work to stop the front derailleur from shifting outside of its intended range. They are adjustable as to match different types of cranks.

Derailleur Cage – The cage is what holds the chain on gear and what presses on the chain to move it from one gear to the next. The outer portion of the cage (C) is what helps the chain move from larger gears to smaller ones. In contrast, the inner portion of the cage (B) forces the chain from smaller gears to larger ones.

Common parallelogram front derailleur found on Hybrid and Mountainbikes

Derailleur Fixing Bolt (D) – The bolt that holds the derailleur in place on the frame. By loosening this bolt, you can re-position the derailleur for angle and height.

Cable Pinch Bolt (E) – The Cable that controls shifting needs to be held firmly in place. The pinch bolt does that job.

Different Pinch bolt and fixing bolt position for MTB/Hybrid (above) and Road (below) derailleurs

Location, location, location

You guessed it, the most important part of adjusting the front derailleur is its location. If the derailleur is not positioned properly, you will never achieve proper, noise free, shifting in all gears. The reason location is so important is that the front derailleur cage is formed to position the chain in very specific locations.

First step in adjusting the front derailleurs location is to set its height. You need enough room to fit a Nickel between the teeth on the largest chainring and the bottom of the outer cage when they are lined up. Any more clearance than that and the derailleur tends to have issues pulling the chain down from larger gears.

you should be able to fit a Nickle between the derailleur cage and chainring

Once you have the height set, adjust the angle of the front derailleur so that the outer cage and chainrings are parallel. Any misalignment will result in poor shifting and excess noise.

Proper alignment on the left, and misalignment on the right

Lower Limit

Set the lower limit by adjusting the screw marked “L”. To do this, shift the rear derailleur all the way up into the largest cog. Next check to see if there is clearance between the chain and the front derailleurs inner cage with the chain on the smallest chainring. If the chain is running on the inner cage, thread the limit screw out until you have 2-3mm (that nickel distance again!) between the chain and inner cage. When the opposite is true and you have too much clearance between the inner cage and chain, thread the limit screw in until there is 2-3mm of clearance.

Cable tension

Your Front derailleur should be properly aligned and the lower limit should be set at this point. The next step is to attach the cable to the Pinch bolt. Attach that cable by first making sure your shifter is in its lowest gear, Then pull the cable tight, and finally tighten the pinch bolt onto your cable. Usually, you can shift smoothly up from the smallest ring into the next gear right away, but if there is hesitation going up add cable tension either through a barrel adjuster or by loosening the pinch bolt, pulling the cable tighter, and tightening the pinch bolt down again. If the chain wants to shift up from the small ring over the next ring, release some tension. You know you have it right when the chain can pass from one gear to another smoothly and confidently without any banging or skipping noises.

Upper Limit

Setting the upper limit is as easy as getting the chain onto the largest chainring and threading the limit screw to offer 2-3mm of clearance between the chain and the outer cage. While shifting, ensure the chain cannot be shifted over the large ring and off the crank.

Trouble shooting

This guide is great if all the parts are new, but won’t overcome many issues related to worn or dirty parts. The most common shifting issue with older gears is poor upshifting. Chainrings are built with ramps on the inner surface to easily guide the chain from smaller to larger rings. As chainrings wear, these ramps wear as well. If you are having serious issues going from smaller to larger gears, but the gears are silent and problem free otherwise, you may want to consider replacing the chain, chainrings, and gears in the rear.

These Praxis Works chain rings have some of the best shifting thanks to carefully placed ramps.

Another key wear item is the front derailleur itself. Derailleurs are designed to pivot off a parallelogram design that requires each pivot run smooth and precisely. As the Front Derailleur wears, these pivots can begin to bind, while they generate play, leading to poor shifting.

Finally, dirty or corroded cables are a key cause in poor shifting. Replace cables once a year and lube them intermittently to keep them running smooth and freely.

When is enough, enough

Working on your bike is fun, but can be frustrating if things aren’t going according to plan. When things get out of hand, don’t be afraid to start from scratch and go back to step one. Any missed initial steps will make further steps impossible to complete. Also, remember that if it gets too tough, your local bike shop is happy to walk you through the process. You will pay a fee, but the one on one instruction is well worth it.

Bike Pic August 24, another fun day on the Mississippi River Trail

Another fun day to ride the Minnesota section of the Mississippi River Trail on this picture perfect Thursday. Here in this photo a cyclist and her friend round the scenic waterscape, between Minneapolis and St. Paul.

What better way to ride through the tail end of the summer and your #NextBikeAdventure. View all the fun ideas and bike destinations in the latest Minnesota Bike/Hike Guide. Then plan your next outing with family and friends in one of Minnesota’s HaveFunBiking Destinations.

Thanks for Viewing Our ‘Fun Day’ Pic

Have a great day!

Bike Pic Aug 19, many mountain bike trails are closed, check first!

Saturday morning and this mountain bike rider finds a dry trail along the Minnesota River bottoms in Bloomington MN. to enjoy. In Minnesota, check MORC trail conditions to see which trail systems may be open after all the rain, the last couple days.

Thanks for Viewing Our ‘Mountain Bike Skills’ Pic of the Day

Have a great day!

Bike Pic Aug, yeah its Friday time for that next bike adventure!

Now that it’s Friday, it’s time to ride off for a weekend of fun on that next bike adventure. As these cyclists demonstrate, why not consider packing up the family and friends and head to the: Tour de Pines, out of Itasca State Park, Park Rapids, MN or the Sadistic Century Dunn County Recreation Park, Menomonie WI. for a weekend of fun.

Thanks for Viewing Our ‘Yeah Its Friday’ Pic of the Day

Have a great day!