by John Brown, HaveFunBiking.com
Mistakes are something we as humans can’t escape, but nobody is perfect. That said, what we can do is try to eliminate some of the simple errors we may make without ever realizing we are proceeding down the wrong path. Consider taking a look below at some of the most common and damaging cycling mistakes made by both occasional and seasoned cyclists.
Cycling Mistakes #1 – Only wear a helmet when you think it’s needed
Many riders make the mistake of thinking “I don’t need to wear a helmet, I’m only going around the block with the kids”. This mentality is often responsible for the catastrophe. The truth is you never know when an accident can happen, so you should always be prepared. As an example, the worst crash I have ever had was when riding from a campsite, down a straight gravel path to the washroom. Before I knew it, I was smack dab on the ground faster than I could get my hands up to catch myself. Moral of the story Is to wear your helmet any time you ride your bike.
Helmets are always in style
#2 – Believing you have plenty of air in the tires without checking
Frequently, I see riders headed down the trail with tires so low you can hear the rim bouncing off the ground with each pedal stroke. Low tire pressure can lead to pinch flats, and more importantly, loss of control. The inner tube that holds the air in your tire is naturally porous and lose air naturally over time. In fact, a tube can lose between 3-5 PSI a day. At its extreme, your tire could go from full pressure to less than half pressure in the span of one week. Be sure to protect your ride by checking tire pressure before each ride.
#3 – Lube the Chain After Every Ride
Believe it or not, an over lubed chain is more damaging than an under the lubed chain. While I am not recommending that you ride around with a dry chain, knowing when to lube is important. Having a ton of lube on your chain will not protect it any better. In fact, too much lube will attract dirt and debris, creating a harsh slurry that covers and wears your drivetrain. The best way to lubricate your chain is to apply lube to the chain, allowing it to soak in for a minute and then use a rag to wipe off as much excess as possible. When done, the chain should feel almost dry to the touch.
The right amount of lube is a great thing
#4 – Use the water hose to clean your bike
After a dusty or wet ride, many riders reach for the hose to spray dirt off the bike. Sadly, while the bike may look clean, the bike will be in worse shape than if it hadn’t been cleaned at all. Pressured water that comes from a hose, can displace grease and leave nothing behind. Now, with no grease, the bike wears out at an accelerated rate. Instead of using a hose, try instead a warm bucket of soapy water and a big sponge.
#5 – Bring water along only on some rides
Many times, riders will assume that because the weather is cool, or a ride is short, they don’t need to bring water with them on a ride. Truth be told, the biggest drain to your energy while riding can be related to dehydration. Stay hydrated by bringing water or a sports drink along on all rides.
Yay Water!
#6 – Assume cycling shoes are only good for clipless pedals
If you don’t want to ride clipless pedals, I get that. There are tons of reasons clipless pedals are great, but at least as many reasons why they aren’t right for everybody. What you can do is use a cycling specific shoe with your flat pedals. A cycling shoe has a stiff sole and additional arch support to disperse pedaling forces over the entire length of your foot. Therefore, you have more efficiency and less discomfort.
Mistakes in general
Overall, it is a good idea to think about what you are doing before you ride your bike. Make sure your bike is ready for the ride, be equipped to take care of yourself during the ride and be sure you are prepared to reach out for help if needed. Once you go through that mental exercise you will see the common cycling mistakes melt away. Have Fun!
