Tag Archives: bicycle visibility

Making a bicycling experience safer with a handlebar blinker light system

At HaveFunBiking, we have shared blinker systems embedded in bicycle helmets and rear-mounted signaling lights. Now, for those with flat bicycle or scooter handlebars, the WingLights might be worth checking out. This inexpensive directional light system (a perfect stocking stuffer) is easy to mount on each end of the handlebars. Then, when turning, tap the light at the end of the right or left handle grip and move to the proper lane, just like signaling when driving a car. As a cyclist riding on the road or trail, you will find added comfort and visibility in displaying your intention when changing lanes or directions.

Just tap the right blinker before gesturing with a right-hand signal.

Just tap the left blinker before gesturing with your left-hand signal.

The WingLight directional blinkers work well on rough roads where cyclists must have both hands on the handlebars. Just a firm tap on the surface of the selected light, and it begins to blink. Then, in 45 seconds, which is usually long enough to make the turn, the light turns off to save on your battery.

Winglights are currently available in two options

The WingLights 360nFixed, their original, is a high-quality turn signal system that magnetically attaches to your handlebar ends. It is easy to install and use. These turn signals flash bright amber and can be seen from all angles. When removed, the units clip together onto a keyring for safekeeping. The Mag is compatible with all handlebars with an inner diameter from 14.7mm to 23mm. They retail for $61.00 and batteries are included.

The WingLights Next is a brand new, non-magnetic turn signal built to the same high specifications as the original system. Like the Mag, the Fixed v3 is permanently attached to your handlebar. The Fixed v3 sells for $79.00 on Amazon.

To order either of these lights or more information or other products, visit the manufacturer at www.cycl.bike

Brighter and safer blinkers

The blinkers help to improve cyclists’ visibility in dangerous areas, in and around intersections.

Using hand signals along with WingLights

At HaveFunBiking.com, we highly recommend the continued practice of using hand signals. Like others on the market, this turning light system offers added visibility to show your intentions when changing directions. However, they should not replace the practice of using hand signals. By continuing to gesture your movement with hand signals and blinkers, you multiply your chances of being seen and staying safe.

Installing the WingLights blinkers

This review made installation quick and easy, taking under ten minutes. At the end of each handlebar grip, cut a sharp knife so the handlebar tube is exposed. Insert the rubber plunger of the Winglight firmly into the handlebar and tighten. You will find full instructions included in the package. Check out the instructional video here for a comprehensive guide on this blinker system.

Sorry, these blinker lights are not suitable for all handlebar types

The current WingLights are only available for straight (sometimes referred to as flat) handlebars. Curved handlebars with a maximum curvature of 30° also work. The company is working on a future design compatible with drop bars (also known as bullhorn and/or cruise bars).

Bike lights will help to keep you safe day and night!

by John Brown, HaveFunBiking.com

No matter your bicycle riding skills, bike lights are essential to make sure you have a safe ride, day or night. Lights aren’t only needed when the sun goes down. In fact, lights are super helpful when riding in conditions where traffic may be present or limited visibility. That’s where proper lighting comes in. Plus, many states, like Minnesota, require you to have lights on your bike. The two types of bike lights on the market are lights that allow you to see and lights that allow others to see you.

Bike lights that Help You See

Lights that help you see are usually high-output LEDs that cast a focused beam of light in front of you. These lights start at 600 lumens and increase output from there—their size and run time depending on the battery. For example, rechargeable and battery-operated lights are usually larger, while lights run by a generator are smaller.

So, how do you know which one is best for you? It all depends on how often you plan on using it. The battery-operated kind works well as backups in the rare chance you get caught in the dark. The rechargeable kind is best if you plan to use them regularly and want to save on the cost of buying batteries. If you ride long periods in the dark, it’s hard to beat a generator-powered light. Any of these lights will be great for unlit roads, trails, or paths.

When you look to buy a light, they are all compared by the lumens they produce. What’s a lumen, you ask? Well, lumens are the most popular description of brightness. In the past, lights were measured by the amount of energy they consumed (watts), but with LEDs that get more light output with less power consumption, measuring brightness with watts has become impossible. Simple rule, more lumens equal brighter light. As a comparison, the iPhone flashlight is less than 10 lumens.

Bike lights to Help People See You.

The lights designed to be seen use an LED to flash intermittently when turned on. Surprisingly they can be as small as a few coins stacked on top of one another and have run times in the hundreds of hours. Additionally, they are usually easy to move from bike to bike if needed and are great for city streets and well-lit paths. Some riders are now finding added security in running these lights during the daytime.

Reflectivity

Another great way to ride safely in the dark is to use reflective products. Thanks to advancements in reflective technology, you can find completely reflective clothing, looks like normal fabric and glows when hit by light. There are reflective stickers you can adhere to your bike and reflective bags you can mount behind the saddle or on your handlebars.

How to be Seen

Visibility is about safety, so it’s best to use a belt and suspenders approach. A headlight will allow you to see and be seen from the front. Match that with a reflective jersey, and you become visible from the sides as well. Mount a rear blinker, and you become visible from 360 degrees.

Sign up for our free, weekly E-Magazine for more great content!

A dynamo light is an upgrade you should consider for this fall!

by John Brown, HaveFunBiking.com

Being visible is paramount to staying safe while riding and there are many different types of lights available to help with that pursuit. But, the king of them all is the Dynamo light. Dynamo lights use a bicycle mounted generator for power, staying lit while riding at night and low visibility times of the day. Read on to learn how Dynamo systems work and why they are so dependable.

Dynamo Light: Where Does The Power Come From

With no battery, you generate power with your motion. For a Dynamo light to work you need to attach a generator to your bicycle. Generators are rated for either 3.0 watts to power both a headlight and taillight, or 2.4 watts to power just a headlight.

Generator types

The two main generator types are hub type and bottle type. The hub type is built into a front wheel and generates power as the front wheel spins. Bottle type generators mount onto a bikes frame or fork. Bottle generators have a small wheel that rests against the tire and generates electricity as the tire spins the wheel. Typically, the hub type generators have lower resistance than the bottle type and won’t wear out a tire as quickly. Bottle type generators are typically less expensive and can also be installed on your bike without rebuilding or replacing the front wheel. Another benefit of bottle type generators is that they can be disengaged during daylight hours so you can ride resistance free. That being said, as hub generators become more efficient and less expensive, the bottle generators are becoming less common.

Hub generator from Shimano and wheel generator from Busch + Müller (photo Courtesy of Busch + Müller)

Front Light types

Of all the light types on the market, high output LED headlights rule the roost. These HLED lights use very little power to deliver a ton of light. While we are talking about light, most headlight’s power are measured in LUX. The differences in power can be seen below. In addition to light while riding, most headlights have a capacitor to store power and allow the light to shine for a small period while the bike is stopped.

This is the same section of road under 20, 50, and 100 LUX lights

A few headlight options from Supernova and Busch + Müller

Rear light types

Rear lights use LEDs and blink while you ride. They can be mounted to the bicycle’s chainstay, seat post, or fender. These rear lights are typically wired from the front light, across the bike, and to the rear light. While it’s easy to run wiring through a bike built to accommodate them, it is difficult to cleanly run wiring on bikes not made for them.

Benefits

Lighting in general is one of the most important aspects of safety on the bike. While you don’t need a dynamo lighting system to be safe, they do offer some advantages over battery powered lights. First benefit is you can jump on your bike and go because you never need to charge a dynamo light like you do a battery system. Also, dynamo systems can be upgraded to charge products via a USB port. Finally, Dynamo lighting systems enjoy the feature of being extremely durable.

if you enjoy our articles, please sign up as a HaveFunBiking member to receive exclusive articles in our weekly E-Mag.