Tag Archives: Kickstarter Bike Product

Futuristic Kickstand Includes a Pump and More

from Ben Coxworth, Gizmag

When most of us think of a cycling multi-tool, we picture something that goes in a jersey pocket or saddle pack. Seoul-based company Leeman, however, is looking at things a little differently. Its Kickstand Pump mounts on the bike, and serves not only as a kickstand and pump, but also a tire lever and tail light.

The Kickstand Pump serves not only as a kickstand and pump, but also a tire lever and tail light. (Credit: Leeman)

The Kickstand Pump serves not only as a kickstand and pump, but also a tire lever and tail light. (Credit: Leeman)

The aluminum alloy tire lever is flat-fork-shaped, allowing it to be snugged up between the bike’s rear dropout and quick release lever (assuming there is one). Because the lever pivots relative to the rest of the tool, it’s able to stay in place when the tool is flipped up for riding or flipped down for kickstand use.

When needed as a pump, the tool is released from the bike simply by pulling the quick release open. A foot stand can then be folded out from the bottom and an included hose run from the pump to the tire’s valve stem (Presta or Schrader), allowing the tool to be used as a 120-psi (8.3-bar) mini floor pump.

The Kickstand Pump, folded down and serving as a kickstand. (Credit: Leeman)

The Kickstand Pump, folded down and serving as a kickstand. (Credit: Leeman)

And yes, it has a red flashing LED on the end, which can be used as a tail light – albeit one that sits rather low – when the tool is on the bike and flipped up.

The components of the Kickstand Pump.(Credit: Leeman)

The components of the Kickstand Pump.(Credit: Leeman)

The Kickstand Pump weighs in at 196 grams (6.9 oz). According to Leeman, that’s less than the combined weight of a separate kickstand, pump, tire lever and tail light. It’s currently the subject of a Kickstarter campaign, where a pledge of US$45 will get you one – when and if it reaches production.

Source: Kickstarter

Magnetic Clipless Bike Pedals May Be Perfected

by Ben Coxworth, GizMag 

Last November we first heard about MagLOCK pedals – clipless mountain bike pedals that use magnets instead of springs to keep the rider’s feet attached, and that can also be used as regular platform pedals. The product fell short of its crowdfunding goal, perhaps because the pedals were kind of clunky, but MagLOCK designer Dave Williams is now back on Kickstarter with a sleeker, lighter and less expensive version.

Unlike their predecessors, the new pedals have a low-profile cutaway design, with a body made from anodized aluminum. They still contain rare earth magnets that engage a steel cleat on the bottom of the rider’s cycling shoe, although those magnets are now cylindrical.

The amount of attraction between MagLOCK pedals and cleats can be adjusted by adding or removing magnets an the weight of the system is now down from 1,540 grams to 974 g per pair of MagLOCK pedals. (Credit: MagLOCK)

The amount of attraction between MagLOCK pedals and cleats can be adjusted by adding or removing magnets an the weight of the system is now down from 1,540 grams to 974 g per pair of MagLOCK pedals.
(Credit: MagLOCK)

As before, the amount of attraction between pedal and cleat – and thus the degree of shoe retention on the pedal – can be adjusted by adding or removing magnets via a stainless steel cover (the rider can release their foot simply by pronating it sideways). A maximum attractive force of 35 lb (16 kg) is possible, which is less than the original model’s 50 lb (23 kg), although Williams claims that it’s still sufficient to keep one’s feet in place even on rough terrain.

The weight of the system is now down from 1,540 grams to 974 g per pair of MagLOCK pedals. By contrast, a pair of Shimano M545 pedals (which combine a platform and an SPD retention mechanism) weigh in at 567 g. According to Dave, however, MagLOCKs allow for more foot-float than SPDs, are easier to engage, and should be less intimidating to riders who are new to foot retention systems.

And yes, they’re cheaper than the old version. Whereas pledge levels for the originals started at US$175, you can currently get a pair of the new ones for $120 – assuming they reach production.

Sources: MagLOCK, Kickstarter