Tag Archives: cycling gloves

A pair of cycling gloves are one of the few pieces of apparel that make direct contact with both your body and the bicycle.

How to choose the right cycling gloves for miles of pain free riding!

by John Brown, HaveFunBiking.com

A pair of cycling gloves are one of the few pieces of apparel that make direct contact with both your body and the bicycle. They help you maintain proper grip on the bars when things get hot and sweaty, they protect your skin in the case of an accidental dismount, and they can help alleviate soreness and numbness in your hands.

However, like any other type of cycling gear, you can’t just grab any pair of gloves off the shelf. The gloves have to be the perfect fit for you. Below is some information to help you find the right pair.

The importance of cycling gloves to the ulnar nerve

Through the palm of your hand runs a nerve called the ulnar nerve. It’s the nerve responsible for the shock you feel when you hit your funny bone. It’s also responsible for the sensation in your pinkie, ring finger, hands, and any subsequent discomfort when riding. By holding the handlebar, pressure is placed on the ulnar nerve, sometimes creating numbness or pain.

cycling glove ulnar nerve

The ulnar nerve and the critical pressure point

At the location where your hand, the ulnar nerve, and the handlebar make contact is where cycling gloves offer relief. Many gloves include padding on the palm to disperse the force being applied to the Ulnar nerve. The pad acts as a little bridge over the nerve, eliminating hand discomfort, and allowing you endless miles of comfortable riding.

Cycling Gloves Ulnar nerve correction

Ulnar nerve being protected by pad

Finding the Perfect Pair of Cycling Gloves

When trying on cycling gloves, focus on the webbing between your pointer finger and thumb. The webbing will give you a great indication of fit when holding a handlebar. If the glove is snug enough to avoid scrunching up and chaffing, then it’s a good fit. However, if the glove is too tight through the webbing, then holding the bar will only intensify that pressure.

If this is your first time using gloves, realize that holding a bar with gloves will feel different. If it feels like the padding puts your hand in an unnatural position, try on different pairs until you find one that feels more normal.

Cycling gloves come in two major categories; full finger and half finger. Both types offer the same sizing and padding options. For road and path riding half finger gloves work great. They allow for good feel on the controls and manage sweat well. If you are riding off road, a full finger glove offers better protection in case of an accidental dismount.

Cycling Glove types

Half finger and full finger cycling gloves

When you follow the tips above, you should easily be able to find gloves that help you enjoy mile after mile of comfortable riding.

For keeping your gloves clean and stretching there longevity this article.

If you enjoy our content and want access to exclusive content fr our members only, please sign up for our free, weekly, E-Magazine

Sealskinz' has evolved their product line to include the Halo Bike Glove.See what makes these gloves interesting for winter rides.

Out of the box first impression of Sealskinz’ Halo Glove for winter rides

by John Brown, HaveFunBiking.com

In a previous article, I talked at length about the Sealskinz’ new Super Light Pro Sock. While Sealskinz as a company began with socks, they have evolved their product line to include headwear and gloves for winter rides. One of the products that piqued my interest was the Halo glove. It drew my attention because it is a waterproof, winter glove with an active blinker system built in. Read on to see what makes these gloves interesting and some of my initial thoughts.

The Halo Glove for winter rides

Even though Sealskinz made a name for themselves with socks, they didn’t allow themselves to get caught on their heels (HEELS! Get it!). Sealskinz is committed to keeping all your extremities warm and dry. That mission is the inspiration behind the Sealskinz gloves we will be reviewing for winter rides. My first review will be on the Halo glove, a unique waterproof glove with powerful LED lights built into the back of the hand.

Halo Glove

Waterproof doesn’t stop at the product for Sealskinz. Even the packaging that holds your glove is considered. Rather than punching holes in the glove to mount it to a backer card like most brands, Sealskinz sews loops into the glove to ensure it never gets damaged.

The Halo bike glove is an $80 investment full of many features. It is constructed with a synthetic suede palm, incorporating gel pads for greater comfort on winter rides. The outer shell is completely waterproof, and the glove is machine washable. Additionally, the liner uses an anti-slip material that won’t pull out of the glove when you remove them. Finally, the cuff closes with soft Velcro straps that are large enough to be manipulated with a gloved hand.

Bicycling Glove Features

One thing that is unique to cycling gloves is the way they insulate. Most cycling gloves are windproof, waterproof, and have minimal insulation. I can hear you asking already “minimal insulation?”, yes minimal. Cycling gloves rely on you to generate heat by exercising on winter rides. Under those circumstances, the glove holds the heat you create, keeping you warm. By being water/windproof and relatively thin, cycling gloves offer better dexterity than a normal winter glove.

First Impressions

Immediately upon putting the gloves on, I was impressed. The liner is soft and warm to the touch, and the glove fit was great. All the fingers articulate well without any pulling of material folding uncomfortably. Additionally, the lights activate easily and are really bright.

 

The first time I rode with the Halo bike glove the temperature was just below freezing and rainy. Luckly, it wasn’t a real downpour and more of just a misting, but it was wet none the less. My forty minute commute ended with all my fingers being warm and toasty. Since that day I have ridden down to about 20 degrees and the gloves never left me wanting in the warmth department. My commuter bike has a flat handlebar, so when the Halo’s lights are activated, they shine forward giving me more visibility to oncoming traffic. In the case of a drop handlebar, the Halo glove will shine to your sides.

halo glove

The Halo’s lights are really bright, and really lightweight.

Moving Forward

I hope to push these gloves as far into the cold as I can handle. Once I reach the Halo’s limits, I get to switch to Sealskinz Highland Claw Glove for the colder temps. Overall, I am really excited to see what the life of the lights on the Halo glove is and if they can survive the cold and moisture of Minnesota’s winter. Stay tuned for more info.

Clean biking gloves are essential before storage to extend there life for your next riding season.

Clean Biking Gloves and the Disgusting Things That Get on Them

by Jess Leong, HaveFunBiking.com

As you enjoy the fresh fall air while you ride, we hope you have clean biking gloves!

With Fall officially here and some of the best biking ahead, with colorful scenery and mild temperatures, many people are thinking about winter storage preparations. While bike

Clean biking gloves are essential so they are not gross or smelly.

Clean biking gloves are essential so they are not gross or smelly.

maintenance is an important thing to do before storage, taking care of your cycling gear is just as essential especially if things are a bit smelly. Specially bike gloves, which should be cleaned periodically throughout the season,  so they aren’t foul and disgusting.

Not everyone realizes that their riding gloves should be washed occasionally – this includes gloves that have leather or a material that may not seem like it is ‘machine washable’.

Why Clean Biking Gloves?

Clean biking gloves do more than just grip those handlebars better or reduce vibrations while riding. They also absorb all the sweat and skin cells that come from a rider’s hands. The sweat and skin cells can eventually build up within the gloves and make them smell due to the growth of various bacteria. Therefore, taking care of cycling gloves is something that everyone should do.

When riding, whether racing or for recreation, biking gloves can become quite dirty, stinky and bacteria ridden.

What gets on Typical Biking Gloves?

Here is an assortment of clean biking gloves you may have that should be washed periodically to eliminate odors.

Here is an assortment of clean biking gloves you may have that should be washed periodically to eliminate odors.

Dirt, Grease, and Bacteria

Let’s start with the most obvious one. Dirt and bacteria. When a rider puts on their gloves it isn’t likely that they will be taking it off anytime soon. Even if they stop for a drink, you’ll generally find gloves still securely on the rider’s hands. Your hands touch a lot of objects and whatever you can usually find on your hand when out and about, it’s likely to be on your gloves.

Dirt and general bacteria from the great outdoors isn’t the only thing that might end up on gloves. Many riders also use their gloves to rub at chain ring tattoos. Therefore, grease can also adhere to the gloves and be transferred on the handlebars or penetrate into the gloves. For information about how to avoid and deal with grease marks, we have an article that covers that so hopefully grease – on a general outing – won’t be on your gloves.

Additionally, bacteria can come from when riders may cough into their gloves. This means that saliva can also get on the outside of the gloves and stay there.

Sweat

Another obvious offender is sweat. The cycling gloves help ensure a good and tight grip on the handlebars so the rider always has control of their bicycle. Without gloves, sweat can make handlebars slick. This decreases the degree of safety a rider can have while doing serious biking. The gloves absorb the sweat into the material so it doesn’t cause a problem or irritate the rider as they continue on their journey.

Since the material is easily accessible, as it is on a rider’s hands, riders also tend to use the gloves to wipe sweat from their faces. So while sweat may be in the interior, it also tends to be on the outside as well.

Dead Skin Cells

We continuously lose skin cells, but a moist glove gathers those skin cells since there is no place for them to go. This can eventually cake the inside of the gloves. While it may not be obvious, can make the material stiffer and make the material inside less comfortable.

Snot

When listing off what can be on biking gloves, snot is not something that readily comes to mind. Why should it? It definitely isn’t pleasing to think about, and definitely makes many people cringe. However, when someone is biking, sweat and a runny nose that comes from exertion, in any weather, can happen.  Unable to reach for a tissue or blow their nose, many riders use their gloves or sleeves to quickly deal with a dripping nose.

Sweat makes the interior and exterior of the gloves moist. When gloves are placed in darkness, it becomes the ultimate breeding ground for bacteria to quickly multiply. This creates the smell that gloves can emit. If not taken care of properly over time, the smell can be difficult to remove.

So before you dig into your bike bag for a pair of gloves or borrow someone else’s, remember this. You never know what another person’s biking gloves have been through. It also means that washing your own biking gloves should be seen as a regular practice rather than only washing them once during the biking season.

Learn how to clean your gloves – no matter what material – by looking at our easy step-by-step article.

Jess Leong is a writer for HaveFunBiking.com.